How To Install Window Blinds In Bluff City

Countless Bluff City families turn to window blinds when they want more privacy and control over daylight in their properties. They’re a useful and cost-effective window covering. They also require just a handful of steps to place for experienced DIYers. But, nothing is more convenient than working with a professional window treatment installer. Here are the essential steps of putting up window blinds and when you ought to contact the professionals to handle it for you.

Get Precise Measurements

Before you start, decide if you need outside-mount or inside-mount blinds. This crucial detail will help you see where to measure. Measure the height, width, and depth inside your frame for inside-mount installations. When hanging outside-mount blinds, mark the height and width of your window, which includes the trim, and add three inches to your measurements to make sure you get good coverage. Measure exactly–refrain from rounding up or down. Poorly fitting blinds will not function smoothly.

Shop For Blinds

Once you have your measurements, you may choose your blinds. You may already know what type of blinds you would like. Pick blinds that equal your measurements as closely as possible. Off-the-rack blinds might not fit exactly, either extending out too much or not getting to the end of the window properly. Be sure to have hardware that lets your blinds hang at the right depth, as well. You should choose specially made blinds for a perfect fit.

Install Your Blinds

Your blinds might have instructions. Use them to install your exact product. If you would like a glimpse of how difficult it is to install window blinds in Bluff City, here are some general steps to give you a better understanding.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the window’s frame about one inch from the side. Ensure this spot won’t hinder the blind’s operation. Outline the bracket holes with a pencil.
2. Drill pilot holes on your marks.
3. Align the bracket where you drilled and secure with screws.
4. Duplicate the initial three steps for the other bracket.
5. Place the end caps onto the blind’s top rail. Slide the rail into the brackets.

Attach the tilt wand and try it out. Also, try out the pull cord.

Outside Mount Blinds

1. Decide if you’re mounting on the wall surrounding the window or the window’s trim. Hold the headrail in place and make sure the blind reaches the bottom edge of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from each headrail mark and mark your bracket holes here.
4. Drill pilot holes as indicated.
5. Line up the bracket holes with your wall holes and attach with screws.
6. Position the top rail into the brackets.

Attach the tilt wand and try out everything to ensure it works.

Pick The Easiest Way To Install Blinds 

Of course, you don’t have to install blinds yourself. The simplest way to install window blinds in Bluff City is to seek out a professional window treatment installer. They will assist you at every step of the process. They’ll help you pick blinds that accommodate your needs and preferences, make precise measurements for a custom-made product, and attach them for you. They guide customers daily, so they’ll do it swiftly and precisely. They’ll know how to diagnose any issues without taking hours looking for help on the Internet. A window treatment expert will also provide higher-quality blinds than online or box stores.

Avoid The Trouble And Have Sunburst Shutters Install Your Window Blinds In Bluff City

Getting new window blinds in Bluff City couldn’t be easier when you consult with Sunburst Shutters NW Tennessee. We’ll help you find custom-made blinds that will fit your windows precisely, and our professional installation staff will attach them for you. All you have to do is call 276-685-5343 or complete the form on this page to arrange a no-cost in-home consultation.